Driver for ADSL usb modem Actiontec

[dukenukem4d]

Hi , Pardus is very nice

May i ask is it possible to include in contrib ,the driver for this device
Actiontec home dsl external usb modem?
http://hardware4linux.info/usb/0451/6001/

it is still in active developement
http://code.google.com/p/ndis-actiontec/
the most compatibile version is folowing binary :
  ndis_actiontecSLAXv0.1-d.tar.gz

i have tryed it ,confirmed working ,even on live cd pardus 2007.3

Code:

pardus # ifconfig dsl0
dsl0      Link encap:Ethernet  HWaddr 00:20:E0:C4:C2:5E
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:604007 errors:0 dropped:0 overruns:0 frame:0
          TX packets:347849 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:786198560 (749.7 Mb)  TX bytes:25097130 (23.9 Mb)

Code:

usb 2-1: new full speed USB device using uhci_hcd and address 4
usb 2-1: new device found, idVendor=0451, idProduct=6001
usb 2-1: new device strings: Mfr=4, Product=10, SerialNumber=30
usb 2-1: Product: DSL Modem
usb 2-1: Manufacturer: TI
usb 2-1: SerialNumber: 00.20.E0.C4.C2.5E
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: reset full speed USB device using uhci_hcd and address 4
ndiswrapper: driver tiauxln (Actiontec Electronics, Inc.,04/02/2002,3.2.4.2) loaded
dsl0: ethernet device 00:20:e0:c4:c2:5e using NDIS driver: tiauxln, version: 0x304, NDIS version: 0x500, vendor: 'Actiontec USB Home DSL Modem', 0451:6001.F.conf

it is shown in network manager , but actual connection
must be made in help of pppoe-stup or adsl-setup


the adequate versions of ndiswrapper for non troublesom functiong
of this driver are greater then 1.40
 Pardus          2008.1  2008  2007.3  2007.2
 ndiswrapper     1.53     1.52     1.49     1.46
and i beleive  should work well ,on all of the above.