Packetmanager

[Lisa]

HI Hendrikus,

As for using sha1sum to check verification, you would do this command in terminal:

Code:

sudo pisi check

It takes a while for it to check all programs, and I do it while connected to internet, though I'm not sure if it needs to be, but I got all outputs
"* Checking pisi. . . OK"
I see one was corrupt for me,
"* Checking sun-jre...                                                                                   
Corrupt file: /opt/sun-jdk/jre/bin/ControlPanel" 

I don't see that version of 2.2.1-2 , if you look here:
http://packages.pardus.org.tr/pardus-2009/
Sorry, but I don't know what "zynaddsubfx" translates to?

We shall see what further help you get at bug report.  Maybe they will have you manually install package-manager and/or pisi.
Maybe you can send them a full history of your pisi updates. 
Regards, Lisa Marie

[Hendrikus Godvliet]

HI Hendrikus,

As for using sha1sum to check verification, you would do this command in terminal:

Code:

sudo pisi check

It takes a while for it to check all programs, and I do it while connected to internet, though I'm not sure if it needs to be, but I got all outputs
"* Checking pisi. . . OK"
I see one was corrupt for me,
"* Checking sun-jre...                                                                                  
Corrupt file: /opt/sun-jdk/jre/bin/ControlPanel"  

I don't see that version of 2.2.1-2 , if you look here:
http://packages.pardus.org.tr/pardus-2009/
Sorry, but I don't know what "zynaddsubfx" translates to?

We shall see what further help you get at bug report.  Maybe they will have you manually install package-manager and/or pisi.
Maybe you can send them a full history of your pisi updates.  
Regards, Lisa Marie

Hello Lisa

Code:

hendrikus@pardus ~ $ sudo pisi check

Wachtwoord:
Controleren alle geïnstalleerde pakketten
Systeemfout: programma beëindigd.

Gebruik pisi help voor algemene hulp.
Gebruik --debug voor een terugloop.
hendrikus@pardus ~ $

The same and the same outcomes again and agian.
Systeemfout: programma beëindigd. #systemfalt: program terminated.

Gebruik pisi help voor algemene hulp. # Use pisi help for help etc.......

I think Pisi isn't anylonger in my live? What do you think?

But Lisa you are helping my so good, but don't worry i am not depending alone on this Pardus 2009 version.
On my laptop and desktops i have more Pardus versions with partitions off Pardus 2008.2 and 2009.

So now i am will wait for what they can do with my bugreport.


Regards Hendrikus

[Lisa]

Hendrikus, sometimes I go off on wrong limb, so be forewarned.     I try to solve puzzles.

Besides sending "pisi hs" attachement to bug report, you might also include a copy of
.package-manager.log
located in your home folder (hidden file).
Regards, Lisa Marie

[Hendrikus Godvliet]

Hendrikus, sometimes I go off on wrong limb, so be forewarned.    I try to solve puzzles.

Besides sending "pisi hs" attachement to bug report, you might also include a copy of
.package-manager.log
located in your home folder (hidden file).
Regards, Lisa Marie

Wauw thanks Lisa this is great info thats what i needed to completed my bug report!
I will inclose it tomorowmorning.

I will send you more Jumbo puzzles
What's that Hendrikus?
Jumbo is one of the leading Dutch puzzle companies.
http://www.jumbo-world.com/dcm/dcm_nl/dcm.php



Hendrikus





 

[Hendrikus Godvliet]

Hendrikus, sometimes I go off on wrong limb, so be forewarned.     I try to solve puzzles.

Besides sending "pisi hs" attachement to bug report, you might also include a copy of
.package-manager.log
located in your home folder (hidden file).
Regards, Lisa Marie

.package-manager.log
1170 lines 
Bug report: Comments cannot be longer than 65,535 characters.
For that i placed the first 65,535 characters
http://bugs.pardus.org.tr/show_bug.cgi?id=11912

Regards, Hendrikus

[trixon]

You can, and should, attach it as a file.
Also, add LC_ALL=C before your commands, it will be easier to solve your problem then.

Good luck!

[Hendrikus Godvliet]

You can, and should, attach it as a file.
Good luck!

Thanks. Done it!
http://bugs.pardus.org.tr/show_bug.cgi?id=11912

Gr Hendrikus

[Lisa]

Also, add LC_ALL=C before your commands, it will be easier to solve your problem then.

Hi Trixon,

If you have time, can you share how to use so I will know in the future, may be give an example of command line. Sorry, newbie about it. 
Thank you.
Regards, Lisa Marie

[Lisa]

Hendrikus,
When it is convenient, can you send the
"pisi hs" attachement to the bug report showing all of your updates and package installs. 

I am also curious if you try this in terminal (may be you already tried this):

Code:

package-manager

which should take a few seconds to bring up the GUI.

Also, try in terminal:

Code:

pisi info package-manager

I would also expect it to give you an error.
Regards, Lisa Marie

[trixon]

I did, just a page back, http://worldforum.pardus-linux.nl/index.php?topic=3123.msg15559#msg15559

Code:

pisi it THIS_WILL_DO_NO_GOOD

Programmet avbröts.
Du måste vara root för den här åtgärden.
Vänligen använd 'pisi help' för allmän hjälp.
Använd --debug för att se en bakåtspårning.

Code:

LC_ALL=C pisi it THIS_WILL_DO_NO_GOOD

Program Terminated.
You have to be root for this operation.
Please use 'pisi help' for general help.
Use --debug to see a traceback.

[Hendrikus Godvliet]

I did, just a page back, http://worldforum.pardus-linux.nl/index.php?topic=3123.msg15559#msg15559

Code:

pisi it THIS_WILL_DO_NO_GOOD

Programmet avbröts.
Du måste vara root för den här åtgärden.
Vänligen använd 'pisi help' för allmän hjälp.
Använd --debug för att se en bakåtspårning.

Code:

LC_ALL=C pisi it THIS_WILL_DO_NO_GOOD

Program Terminated.
You have to be root for this operation.
Please use 'pisi help' for general help.
Use --debug to see a traceback.

Trixon

Thank you verry much this make's thinks clear, and understandeble.
I will use LC_ALL=C when i have to deal with bugreports and worldforum post.

Thanks Hendrikus

[Hendrikus Godvliet]

Hendrikus,
When it is convenient, can you send the
"pisi hs" attachement to the bug report showing all of your updates and package installs. 

I am also curious if you try this in terminal (may be you already tried this):

Code:

package-manager

which should take a few seconds to bring up the GUI.

Also, try in terminal:

Code:

pisi info package-manager

I would also expect it to give you an error.
Regards, Lisa Marie

Code:

hendrikus@pardus ~ $ package-manager

Traceback (most recent call last): 
  File "/usr/kde/4/bin/package-manager", line 49, in <module>
    manager = MainWindow()
  File "/usr/kde/4/share/apps/package-manager/mainwindow.py", line 34, in __init__
    self.iface = backend.pm.Iface()
  File "/usr/kde/4/share/apps/package-manager/backend/pisi/iface.py", line 35, in __init__
    self.initDB()
  File "/usr/kde/4/share/apps/package-manager/backend/pisi/iface.py", line 51, in initDB
    self.replaces = self.pdb.get_replaces()
  File "/usr/lib/pardus/pisi/db/packagedb.py", line 205, in get_replaces
    if pisi.replace.installed_package_replaced(r):
  File "/usr/lib/pardus/pisi/replace.py", line 40, in installed_package_replaced
    return pisi.relation.installed_package_satisfies(repinfo)
  File "/usr/lib/pardus/pisi/relation.py", line 55, in installed_package_satisfies
    if not installdb.has_package(pkg_name):
  File "/usr/lib/pardus/pisi/db/installdb.py", line 105, in has_package
    return self.installed_db.has_key(package)
  File "/usr/lib/pardus/pisi/db/lazydb.py", line 96, in __getattr__
    self.__init()
  File "/usr/lib/pardus/pisi/db/lazydb.py", line 91, in __init
    self.init()
  File "/usr/lib/pardus/pisi/db/installdb.py", line 72, in init
    self.rev_deps_db = self.__generate_revdeps()
  File "/usr/lib/pardus/pisi/db/installdb.py", line 98, in __generate_revdeps
    self.__add_to_revdeps(package, revdeps)
  File "/usr/lib/pardus/pisi/db/installdb.py", line 85, in __add_to_revdeps
    meta_doc = piksemel.parse(metadata_xml)
MemoryError
package-manager(2060): Communication problem with  "package-manager" , it probably crashed.
Error message was:  "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "

hendrikus@pardus ~ $

Code:

hendrikus@pardus ~ $ LC_ALL=C pisi info package-manager

System Error. Program Terminated.

Please use 'pisi help' for general help.
Use --debug to see a traceback.
hendrikus@pardus ~ $

[henrikh3]

I tryed to install Pardus 2009 on a PC today. But the Pisi/updating after installing not working.

So I will wait to version 2009.1 are released. I hope this problem are solved then.
But I am little worried. I think the time between the beta,  RC and the real version are to short.
Is it enough time to test everyting?

It was a lot of bugs when they released version 2009, so I hope it not be the same this time.

[Hendrikus Godvliet]

I tryed to installou to  Pardus 2009 on a PC today. But the Pisi/updating after installing not working.

So I will wait to version 2009.1 are released. I hope this problem are solved then.
But I am little worried. I think the time between the beta,  RC and the real version are to short.
Is it enough time to test everyting?

It was a lot of bugs when they released version 2009, so I hope it not be the same this time.

Maybe it has to do with oure name's - Henrikh3 and Hendrikus that we have the same Pisi problem?
Do you think so? No I don't think so!
But anyway we have the same problem. So let shake hands

[atolboo]

I tryed to install Pardus 2009 on a PC today. But the Pisi/updating after installing not working.

Did you apply >Before doing any update< after the installation